Other listings by this author |
|
 wodFTPServer 3.1.2 (Downloads: 306)
ActiveX Component that implements server side of FTP, FTPS and SFTP protocol ActiveX Component that implements server side of following protocols: FTP, FTP/S (FTPS or FTP+SSL) both in explicit and implicit modes, and SFTP (secure ftp subsystem on SSH2 secured channel).
Support for all 3 protocol is transparent for your programming - you have same set of events, same set of properties and methods, same control over connected users - and just one property to change to switch from one protocol to another - Protocol property!
...
|
|
 wodVPN 2.2.3 (Downloads: 298)
Creates virtual private network with another wodVPN instance on another computer wodVPN is VPN peer-to-peer ActiveX component that is used to establish Virtual Private Network between two wodVPN instances over internet. All communication between those peers is encrypted and secured. Peers are able to forward local and remote ports, send messages, etc.
UDP packets are used to transfer data between peers, in which case several techniques are available to make direct NAT 2 NAT connection between peers. And if direct connection is not p...
|
|
 wodSSHTunnel 1.7.2 (Downloads: 287)
wodSSHTunnel component is secure tunneling (based on SSH protocol) component wodSSHTunnel component is server-type component that will add secure tunneling (based on SSH protocol) capabilities to your application. Based on your rules and definitions, it will accept local connections, encrypt it and forward to SSH server (where they will be decrypted and sent to destination host). SSH server is required for this component to work - encryption will take place between local computer (running wodSSHTunnel) and SSH server of your choice.
It...
|
|
 wodXMPP 1.4.3.1 (Downloads: 331)
wodXMPP is messaging client component for XMPP/Jabber protocol Basic information about wodXMPP
You can use wodXMPP as instant messaging and presence protocol - you can see your contacts online, send and receive messages with them, send and receive notifications, etc.
There are two variations of wodXMPP -
1. COM Object which is invisible and should be used "under the hood" in your applications
2. OCX Control which has GUI (as seen on the right side of this page). Each contact is drawn by ...
|
|
 wodDHCPServer 1.0.7.0 (Downloads: 213)
wodDHCPServer provides passing configuration information to hosts on TCP/IP General information
wodDHCPServer is a DHCP server component (Dynamic Host Configuration Protocol), available as COM object and ActiveX control. It provides a framework for passing configuration information to hosts on TCP/IP network. wodDHCPServer implements protocol specific infrastructure, allowing you to allocate IP addresses from your address pool, and provide it to requesting clients by your rules. It is configurable by set of objects and events where yo...
|
|
 wodSmtpServer 2.5.1 (Downloads: 345)
wodSmtpServer ActiveX component is SMTP server component WeOnlyDo! SmtpServer ActiveX control is a component that can be easily integrated into your applications to provide full non-relaying Smtp (Simple Mail Transfer Protocol) server implementation.
All you need to do is to put it on VB form, call it's Start method and it's immediately accepting connections by your clients! It fully supports commands defined in RFC2821.
Use your favorite mail client (such as Outlook Express or Eudora) to send mail to ...
|
|
 wodPop3 1.4.2 (Downloads: 265)
wodPop3 is used to access mailbox on the server using POP3 protocol ActiveX component that is used to access mailbox on the server using POP3 protocol. Mail found on the server can be retrieved locally(complete messages or only headers) and/or can be deleted from server. Full set of commands for standard operations is supported.
Using wodPop3 you can easily get information about content of your mailbox.For each message found on server, wodPop3 will create new Message object in Messages collection, allowing you to easily...
|
|
 wodSSH.NET 2.5.3 (Downloads: 379)
wodSSH.NET is a client SSH and Telnet component for .NET framework Client component for MS.NET framework that provides support for communication with remote console-type services. It allows you to communicate encrypted (and secured, of course) with SSH1 and SSH2 (secure-shell) servers, as well to Telnet servers (using Telnet protocol that is NOT encrypted). For ones that don't know - the SSH transport layer is a secure low level transport protocol. It provides strong encryption, cryptographic host authentication, and integrity prot...
|
|
 wodSSHServer 2.2.6 (Downloads: 349)
SSH and Telnet Server ActiveX component,support SSH2/SFTP server capabilities wodSSHServer is an SSH Server ActiveX component (but also Telnet Server ActiveX as well) that will give you ability to easily add SSH2 (and SFTP) server capabilities to your application, as well as old TELNET server protocol. SSH protocol provides strong encryption of data, and authentication of users over insecure networks, such as Internet. Using it is really easy. Add it to your form (or create instance on the fly), use internal methods to generate pair of keys f...
|
|
 wodImapServer 2.4.1 (Downloads: 315)
wodImapServer ActiveX control is IMAP4 protocol server component WeOnlyDo! COM ImapServer ActiveX control is component that can be easily integrated into your applications to provide full IMAP4rev1 protocol server implementation. All you need to do is to put it on VB form, call it's Start method and it's immediately accepting connections by your clients! It fully supports commands defined in RFC2060.
Since wodImapServer is COM object and not the full application, there's few things developer should look after - simpl...
|
|
wodMailbox 2.2.2 (Downloads: 287)
wodMailbox provide full management over mailboxes and message parsing WeOnlyDo! Mailbox is a component that can be easily integrated into your applications to provide full management over mailboxes and message parsing.
Using wodMailbox, you can easily access mailbox, count messages, look at messages, count parts, save attachments, look at headers, delete messages etc.. When wodMailBox opens mailbox, it expects to find there either regular mailbox just as is used on UNIX systems (one file with full mail messages one after anothe...
|
|
wodFtpDLX 3.1.2 (Downloads: 318)
Secure FTP client ActiveX component that supports FTP, FTPS and SFTP protocol wodFtpDLX is developed as two standalone components:
COM object, that should be used when you want to do all file transfer in the background and is not visible on the form, or GUI ActiveX version that has it's own Explorer-alike window where you can give end users ability to interact directly with the server
Features:
FTP, FTP+SSL with and without encrypted data channel, and SFTP (SSH subsystem) protocols
Certificate authentication w...
|
|
 wodAppUpdate 1.5.4 (Downloads: 289)
Web Update component will easly deploy new updates for your application. WodAppUpdate component should be used by your application to quickly, easily, and securely provide automatic update solution - very popular "check for updates" functionality. This way you increase value and functionality of your product because now your customers always have the most newest version - and you need only 3 lines of code to provide it! wodAppUpdate uses configuration file it finds on the server of your choice (HTTP, HTTPS or FTP) and then dete...
|
|
 wodSmtp 1.5.3 (Downloads: 325)
wodSmtp activex client component used to deliver e-mail messages to server ActiveX client component used to deliver email messages directly to the server of the recepient, using SMTP protocol. It automatically finds appropriate server where message should be delivered, or uses SmartHost through Hostname property.
It includes several one-line methods for sending entire email (including attachments). It can also load prepared messages (created with Outlook, Outlook Express or any other client..), reformat it, change it's properties an...
|
|
 wodCrypt 2.1.3 (Downloads: 343)
wodCrypt is a component that provides strong encryption for your applications Lightweight component that provides strong encryption for your applications. It provides supports for most common crypto algorithms, such as
AES
DES, TripleDES
Blowfish
Cast
RC2
RC4
RC5
for symmetric encryption and decryption,
RSA
DSA
for making and verifying signatures, and
MD5
SHA1
for creating hashes.
Working with Blobs
wodCrypt works with Bl...
|
|
 wodWebServer.NET 1.3.4 (Downloads: 341)
Is an .NET Component that implements server side of HTTP and HTTPS protocols General information:
wodWebServer.NET is an .NET Component that implements server side of HTTP and HTTPS protocols (HTTPServer). It's main purpose is to serve HTML pages, GIF/JPG/PNG images, documents, and other resources that are accessible through Browser clients (such as Internet Explorer, Mozilla Firefox, Netscape etc..) It is robust, easy to use, fast, and can be used in all .NET environments. It serves both static pages, as well as dynamically created on...
|
|
 wodWebServer 1.5.8 (Downloads: 251)
ActiveX Component that implements server side of HTTP and HTTPS protocols ActiveX Component that implements server side of HTTP and HTTPS protocols (HTTPServer). It's main purpose is to serve HTML pages, GIF/JPG/PNG images, documents, and other resources that are accessible through Browser clients (such as Internet Explorer, Mozilla Firefox, Netscape etc..) It is robust, easy to use, fast, and can be used in all environments that support COM technology. It serves both static pages, as well as dynamically created ones. No need to learn ASP...
|
JaSFtp 11.10: JaSFtp - Automated SFTP client (secure FTP), Run 1000+ tasks on a schedule.