Other listings by this author |
|
 SetClock 8.5 (Downloads: 939)
Set your PC Clock from an accurate atomic clock on the web. Set PC Clock from an accurate atomic clock on the web. You
can put in on your website so that others can use it to
correct their clocks without having to install software or
without you having to install software on your server.
Java Web Start signed.
Requires Java version 1.5 or later. Native code for Windows only.
Full Java source code included, and native C JNI code....
|
|
 Volser 1.2 (Downloads: 389)
Gets the 4-byte 32-bit binary volume serial number in Windows. Gets the 4-byte 32-bit binary volume serial number of a Windows
disk drive assigned when it is formatted to provide and almost unique id.
Don't confuse this with the volser(, the string name,
or the manufacturer's disk serial number assigned to a hard drive at the factory.
Uses JNI and C++ native code.
Consists of java and JNI you include in your own code.
You can test with
C:
CD \com.mindprod...
|
|
 Screws 1.3 (Downloads: 248)
CMP Screws and Screwdrivers draws eight types of screw heads. CMP Screws and Screwdrivers draws eight types of screw
heads. It is a teaching example for how to use Java Canvas,
fillRect, fillOval, fillPoly and AffineTransform to draw.
Java source is included for you to cannibalise.
It draws 8 types of screw heads.
To run as an application, type:
java -jar C:\com\mindprod\screws\screws.jar
adjusting as necessary to account for where the jar file is....
|
|
 Holiday Calculatior 4.7 (Downloads: 773)
Calculate when 66 holidays occur in any given year. Calculates when various holidays occur in any given year BC or AD.
Designed to be cannibalised to include the calculation routines in your
own programs. You might use it to prepare paper calenders well in
advance or electronic calendars. You might also use the logic in computer
programs that compute payrolls, bus schedules, or club meetings. You
might use it in writing novels or researching historical events. It can
als...
|
|
 LEDataStream 1.8 (Downloads: 254)
Little-endian replacements for DataInputStream, DataOutputStream and RandomAcces Little-endian replacements for DataInputStream, DataOutputStream and RandomAccessFile. They work just like DataInputStream, DataOutputStream and RandomAccessFile except they work with little-endian binary data. Normally Java binary I/O is done with big-endian data, with the most significant byte of an integer or float first. Intel and Windows 95 tend to work with little endian data in native files. LEDataInputStream, LEDataOutputstream and LERandomAccessFile will le...
|
|
 Official Encoding 1.1 (Downloads: 181)
Discover the official name of any given Java encoding. Official Encoding will tell you the official name of any given Java encoding and whether it is supported by Java. It will also display some of the characters available with that encoding.
Prerequisites:
This program runs under any OS,
(e.g. Win2K/XP/Vista/OSX/Linux/Solaris/Vista64/AIX...) so long as you have
Java version 1.5 or later installed.
Installing:
Download source and compiled class files to run...
|
|
 Pentium 1.5 (Downloads: 281)
Java code to tell you facts about the Pentium and AMD CPU. Pentium works on Windows and Intel Pentium class and AMD
CPUs to determine the CPUID information such as the vendor,
brand/model, step, model, instruction set family, cpu serial
number, and the RDTSC Time stamp register for high
resolution timing measured in CPU cycles since the last
boot. It is designed to be incorporated in your own Java
progams.
You can also use it as a standalone utility with:
java.ex...
|
|
 JarLook 1.2 (Downloads: 318)
Check that class target versions are as expected in a Java jar. Check a Java jar to make sure all the javac -target versions of
the class files are what you expect.
Java application.
Requires Java version 1.5 or later.
All Java source code is included.
to use:
java -jar jarlook.jar jartotocheck.jar 1.1 1.4
where jartocheck.jar is the name of jar to check.
It will check all the class files in it.
In this example:
1.1 is the low...
|
|
 Encoding Recogniser 1.2 (Downloads: 216)
Help determine a file's encoding by displaying it wth all supported encodings. Encoding Recogniser will help you determine what encoding was
used to write a file by displaying the file in hex or and
decoded characters in any of the encodings supported by
Java.
This program runs under any OS,
(e.g. Win2K/XP/Vista/OSX/Linux/Solaris/Vista64/AIX...) so long as you have
Java version 1.5 or later installed.
To install, Extract the zip download with WinZip (or similar unzip utility) into
...
|
|
 Dedup 1.5 (Downloads: 237)
Java command line utility to removes duplicate lines from text files. DeDup is a Java command-line utilty for removing duplicate
lines in text files.
The dedup process compares adjacent lines only. It does not
sort first. The comparison is case sensitive. It removes
adjacent indentical lines. It replaces the original file, so
do a backup first. You can dedup 1 to N files in one
execution, just put their names on the command line.
DeDup deletes blank lines from both the beginning...
|
|
 JarCheck 1.4 (Downloads: 550)
Check that class target versions are as expected in a Java jar. Check a Java jar to make sure all the javac -target versions of
the class files are what you expect.
Java application.
Requires Java version 1.5 or later.
All Java source code is included.
to use:
java -jar jarcheck.jar jartotocheck.jar 1.1 1.7
where jartocheck.jar is the name of jar to check.
It will check all the class files in it.
In this example:
1.1 is the lo...
|
|
 Untouch 2.4 (Downloads: 457)
Reverts files dates back if the files have not really changed. Documentation on the original student project outline
mindprod.com/projects/untouchproj.html
This explains how it works and some of its uses.
Untouch supports the following command line switches which appear
before the directories.
-c or -clear = clear history first and take current file times as the new revert-to point.
-f or -force = revert files back to previous dates whether they have changed or not.
-h or -help =...
|
|
 Replicator 11.3 (Downloads: 827)
The Replicator lets you distribute large numbers of files to many people. The Replicator lets you distribute large numbers of files to
many people efficiently. The software automatically
downloads just the changed files and deletes ones no longer
part of the distribution.
Unlike other similar tools, all it requires is an ordinary
HTTP website. It requires no code to run on the server.
It can also work with CDs, and LANs.
Custom configured for each customer. Not free. Registrat...
|
|
 LinkedList 1.6 (Downloads: 202)
LinkedList is replacement for Java Vector class. Classical doubly linked list. LinkedList is replacement for Java Vector class. Classical
doubly linked list. Faster that Vector for insert/delete, but slower
for indexed access. The interface is modeled on java.util.Vector, so
you can try it both ways and pick which is faster for your needs.
Heavily commented Java source included. copyright (c) 1997-2008 Canadian Mind
Products. May be freely distributed and and used for any purpose
except military.
...
|
|
 Common13 1.3 (Downloads: 290)
common utility classes that work under Swing Java 1.3+ common utility classes that work under Swing Java 1.3+
Includes:
CMPAboutJBox: a proper about box for Swing apps/JApplets that provides useful information.
HybridJ : converts Swing Applet into an Application...
|
|
 Accumulate 1.3 (Downloads: 198)
Used to accumulate values by category. Used to accumulate values by category. It might be useful
for example in a billing program to accumulate hours by
various categories.
It could be used to count how many times various words
occurred in a document.
All you need is:
buckets.accumulate( "somecategory", someamount );
And Accumulate looks after creating the buckets to
accumulate new categories for you.
e....
|
|
 Mouse 1.4 (Downloads: 278)
In Java, allows you to find out where the mouse in on the screen In Java, allows you to find out where the mouse in on the
screen, even when it is not over one of your apps. This has
similar function to MouseInfo.getPointerInfo in Java 1.5+.
This class will work in any version of Java.
It uses JNI and a DLL, so it only works on Windows.
You must install the nativemouse.dll somewhere on the path.
Then your programs can find out the x and y position of the
mouse, [(0,0...
|
